Antoshka_Rus 10 #179975 Posted May 1, 2014 (edited) Обновил шапку по теме от Omegaice. А какая версия мода с конфигом от Meddio в шапке, 1.9 или 2.0 ? Edited May 1, 2014 by Antoshka_Rus Quote Share this post Link to post Short link Share on other sites
evil_rrock 227 #179976 Posted May 1, 2014 А какая версия мода с конфигом от Meddio в шапке, 1.9 или 2.0 ? оба Quote Share this post Link to post Short link Share on other sites
Zelenogorec 168 #179978 Posted May 1, 2014 А какая версия мода с конфигом от Meddio в шапке, 1.9 или 2.0 ? Переделанная версия 1.9 до 2.0, с нашими дополнениями. Quote Share this post Link to post Short link Share on other sites
Antoshka_Rus 10 #179982 Posted May 1, 2014 (edited) Переделанная версия 1.9 до 2.0, с нашими дополнениями. Эта версия так же немного неадекватно работает с новыми версиями XVM т.е. мы при первой установке мода и входе в ангар видим обзор в системном канале, а в бою нет. Чтобы увидеть нормальное отображение получается нужно войти в бой на том же танке 2 раз, либо перезапустить клиент чтобы XVM подхватил данные об обзоре. Я правильно все понял почитав эту тему. Edited May 1, 2014 by Antoshka_Rus Quote Share this post Link to post Short link Share on other sites
Zelenogorec 168 #180062 Posted May 1, 2014 Да, все так. Пока это неисправимо. Позже, все поправят, но не сейчас. Quote Share this post Link to post Short link Share on other sites
Meddio 321 #180075 Posted May 1, 2014 (edited) Meddio can you help me pls again!? I have translated the newest version from Omegaice to german and make it to the multilined version with your version as a model! but i dont know to build a xml config file! Maybe you are so friendly and build me again a config file????? 'Screenshot' DOWNLOAD Adler, I'm sorry, I saw your message earlier (but I was busy at the time), saved it for later, and then forgot to answer. :-( I see that you were able to decompile and compile Python. In that case you can add the XML-part yourself after each update. 'How to add XML?' 1) Decompile currentvehicle.pyc 2) Open the decompiled file (currentvehicle.py). 3) Add the following code to any line starting with "include": , ResMgr For example, change this line: import io, os, json, codecs, math to this: import io, os, json, codecs, math, ResMgr 4) Locate the line starting with: xvm_configuration_file = 'For example:' xvm_configuration_file = os.getcwd() + os.sep + 'res_mods' + os.sep + 'xvm' + os.sep + 'tankrange.xc' 5) and add the following code after the line: 'XML-part code' xml = ResMgr.openSection('scripts/client/currentvehicle.xml') if xml is not None: xml_userpath = xml.readString('ConfigPath') if xml_userpath: xml_fullpath = os.path.normpath(os.getcwd() + os.sep + xml_userpath) if os.path.exists(xml_fullpath): xvm_configuration_file = xml_fullpath 'the RESULT should look like this' xvm_configuration_file = os.getcwd() + os.sep + 'res_mods' + os.sep + 'xvm' + os.sep + 'tankrange.xc' xml = ResMgr.openSection('scripts/client/currentvehicle.xml') if xml is not None: xml_userpath = xml.readString('ConfigPath') if xml_userpath: xml_fullpath = os.path.normpath(os.getcwd() + os.sep + xml_userpath) if os.path.exists(xml_fullpath): xvm_configuration_file = xml_fullpath 6) Save the file and compile it. 7) Create the text file currentvehicle.xml next to currentvehicle.pyc \res_mods\0.9.0\scripts\client\currentvehicle.pyc \res_mods\0.9.0\scripts\client\currentvehicle.xml 8) Add the following content to this file: <TankMinimapRanges> <ConfigPath>res_mods\xvm\configs\tankrange.xc</ConfigPath> </TankMinimapRanges> You can change the path (res_mods\xvm\configs\tankrange.xc) as you see fit. That's all. If you have any problems adding XML-part, feel free to PM me, and I'll do It myself. Edited May 1, 2014 by Meddio Quote Share this post Link to post Short link Share on other sites
deutscher_Adler 13 #180141 Posted May 1, 2014 Ok thx Meddio for your answer! Tommorow i try out this! big thx! Quote Share this post Link to post Short link Share on other sites
Jen1ok 0 #180982 Posted May 4, 2014 Подскажите какой из этих путей будет правильным в конфиг файле, расположенном в \res_mods\xvm\configs "circles": ${"../tankrange.xc":"circles"}, "circles": ${"tankrange.xc":"circles"}, Quote Share this post Link to post Short link Share on other sites
evil_rrock 227 #180989 Posted May 4, 2014 Подскажите какой из этих путей будет правильным в конфиг файле, расположенном в \res_mods\xvm\configs "circles": ${"../tankrange.xc":"circles"}, "circles": ${"tankrange.xc":"circles"}, а tankrange.xc где живёт? Quote Share this post Link to post Short link Share on other sites
Jen1ok 0 #181034 Posted May 4, 2014 (edited) а tankrange.xc где живёт? res_mods\xvm\tankrange.xc Edited May 4, 2014 by Jen1ok Quote Share this post Link to post Short link Share on other sites
Meddio 321 #181036 Posted May 4, 2014 (edited) Подскажите какой из этих путей будет правильным в конфиг файле, расположенном в \res_mods\xvm\configs "circles": ${"../tankrange.xc":"circles"}, "circles": ${"tankrange.xc":"circles"}, Если я правильно понял, конфиг - однофайловый, и структура файлов такая: res_mods\xvm\config.xc - конфиг, из которого нужно сделать ссылку (вместо config.xc может быть любое имя, например, @xvm.xc) res_mods\xvm\tankrange.xc - файл, на который нужно сделать ссылку (в той же папке) Ссылка на файл в той же папке выглядит так: "circles": ${"tankrange.xc":"circles"}, Edited May 4, 2014 by Meddio Quote Share this post Link to post Short link Share on other sites
teleboy555 4 #181514 Posted May 6, 2014 Доброго времени суток!!!! Подскажите а можно ли настроить tankrange.xc или какой другой файл, чтоб при каждом выборе танка в ангаре, выскакивал его обзор с учетом рогов и тд. потому что один раз показал и все. заранее благодарю!!!! Quote Share this post Link to post Short link Share on other sites
deutscher_Adler 13 #181690 Posted May 7, 2014 Thats a nice quest teleboy! I know a other mod ProView, with this mod you can show with a hotkey all time your sightrange but i know know way to see my sight again with the currentvehicle.pyc! Quote Share this post Link to post Short link Share on other sites
Meddio 321 #182133 Posted May 9, 2014 (edited) Свершилось чудо! XVM 2849 Тестим динамические круги на миникарте. дальность обзора (динамически изменяется при включении стереотрубы) - прямо во время боя?А что насчёт просветлёнки? да, во время боя просветленка учитывается, так же как и навыки экипажа и т.д. Я взял за основу код XVM Tank Minimap Ranges (http://forum.worldoftanks.eu/index.php?/topic/284919-xvm-tank-minimap-ranges-v20-090/) Спасибо ув. sirmax. В XVM (minimapCircles) теперь достаточно настроить параметры трех динамических окружностей (арта, пулеметчики, обзор) - и они будут динамически отображаться для каждого танка, учитывая реальный обзор и дальность стрельбы. Никакие дополнительные скрипты и манипуляции с конфигами (и конфигами для конфигов) не нужны =) Стереотруба работает вообще круто. Едешь - показывается только круг базового обзора. Останавливаешься на три секунды - круг увеличивается на 25%. Edited May 9, 2014 by Meddio Quote Share this post Link to post Short link Share on other sites
evil_rrock 227 #182164 Posted May 9, 2014 Свершилось чудо! XVM 2849 Спасибо ув. sirmax. В XVM (minimapCircles) теперь достаточно настроить параметры трех динамических окружностей (арта, пулеметчики, обзор) - и они будут динамически отображаться для каждого танка, учитывая реальный обзор и дальность стрельбы. Никакие дополнительные скрипты и манипуляции с конфигами (и конфигами для конфигов) не нужны =) Стереотруба работает вообще круто. Едешь - показывается только круг базового обзора. Останавливаешься на три секунды - круг увеличивается на 25%. круть =) Quote Share this post Link to post Short link Share on other sites
freeman440 1 #182174 Posted May 9, 2014 XVM 2849 я так понимаю это ночной билд? Quote Share this post Link to post Short link Share on other sites
evil_rrock 227 #182175 Posted May 9, 2014 я так понимаю это ночной билд? правильно понимаете Quote Share this post Link to post Short link Share on other sites
StranikS_Scan 4,213 #182177 Posted May 9, 2014 Ну, вот, я как чуял что надо с бурной деятельностью повременить... и вот оно, вуаля и всё само разрулилось. Осталось только ковырнуть билд и проверить как оно там и где. Quote Share this post Link to post Short link Share on other sites
ddar 63 #182198 Posted May 9, 2014 встроенный и модифицированный tankrange — очень круто, спасибо Quote Share this post Link to post Short link Share on other sites
freeman440 1 #182333 Posted May 9, 2014 Ну, вот, я как чуял что надо с бурной деятельностью повременить... и вот оно, вуаля и всё само разрулилось. Осталось только ковырнуть билд и проверить как оно там и где. слишком долго барин собирались Quote Share this post Link to post Short link Share on other sites