lastvendol 0 Posted October 23, 2020 Hello every1, I am using xvm to configure camera zoom out distance but since last update seems like i cant. I was changing from xvm: camera from enable: false to enable : true and distrange [2, 100] Now this aint working. Has something changed? Quote Share this post Link to post Short link Share on other sites
night_dragon_on 5,601 #491297 Posted October 23, 2020 39 минут назад, lastvendol сказал: Now this aint working Is working. 40 минут назад, lastvendol сказал: I was changing from Check the correctness of the changes made to the config. Perhaps you made a mistake while editing and "default config" is loaded. Quote Share this post Link to post Short link Share on other sites
lastvendol 0 #491302 Posted October 23, 2020 I just unistalled xvm and installed again. I try to edit camera file in folder res_mods/configs/xvm/default/ but still aint working. Quote Share this post Link to post Short link Share on other sites
yepev 287 #491316 Posted October 23, 2020 @lastvendol where are your logs and config? Quote Share this post Link to post Short link Share on other sites
lastvendol 0 #491332 Posted October 24, 2020 @yepev If u mean path of the config folder its C:\Games\World_of_Tanks_EU\res_mods\configs\xvm\default. I try attach a pic from the camera.xc file so u can see the changes i made. The changes i made is from camera enable: false to enable : true and arcade distrange [2, 100]. But it is not working. I was doing this all the time with previous versions and was workin perfect. Dunno what is happening now. Quote Share this post Link to post Short link Share on other sites
night_dragon_on 5,601 #491333 Posted October 24, 2020 @lastvendol , attach: xvm.log python.log From: C:\Games\World_of_Tanks_EU Quote Share this post Link to post Short link Share on other sites
lastvendol 0 #491351 Posted October 24, 2020 xvm.logpython.log Quote Share this post Link to post Short link Share on other sites
night_dragon_on 5,601 #491352 Posted October 24, 2020 (edited) @lastvendol , logs are no longer needed, there is a WG error in the standard client As a temporary solution to the problem, write the value: "distRange": [2, 100], In "postmortem" section. Until the WG fixes the problem on their side. Edited October 24, 2020 by night_dragon_on Quote Share this post Link to post Short link Share on other sites
lastvendol 0 #491375 Posted October 24, 2020 (edited) So its their fault. "distRange": [2, 100], In "postmortem" section seems to work fine. Thx for all the help. Edited October 24, 2020 by lastvendol Quote Share this post Link to post Short link Share on other sites