Psian

How do you do this? I actually did a clean install of windows 10, nvidia drivers, WoT and XVM at one stage. Still same issue. Currently Nvidia drivers and settings are still set at defaults. Also VSYNC being on or off does not affect anything. There is still noticeable shearing when using the 2080 so I leave it on.

Here is a really weird bug. After much trial and error, I have finally found the cause of my FPS drops in game (59 fps to 20 fps). It will always happen when: 1) Vanilla XVM is installed 2) Running at 4k Resolution 59 Hz refresh (wont allow me to select 60Hz for some reason even though my monitor supports it) 3) UI Scaling set to AUTO or 2X 4) Get hit by a High Explosive shell My FPS will drop from 59 FPS (vsync on) to about 20 FPS for about 5 seconds. If I do any of the following: 1) Remove XVM or 2) set resolution to 1080p or 3) set UI to 1x (way too small to play) the problem will go away. My Hardware: RTX 2080 8GB Intel i7 6th gen 16GB RAM There is of course no CPU or GPU throttling at the time and usage usually stays below 50% for both. There is another thread here: https://koreanrandom.com/forum/topic/39917-xvm-causing-massive-frame-drops-during-battle-120-to-sub-20-fps/ that blames the problem on the XVM damage log. However I have found that disabling it just makes the issue less noticeable. There is still a 5-10 fps drop. I hope someone could please take a look at this :)